Mireille Felicia. flooring. March 15th , 2017.
Just a few short years ago, solid wood flooring seemed to be the most popular option. Perhaps this is because solid wood (like oak) tend to look more expensive, and they are certainly more durable. But the problem with such materials is that the wooden planks tend to be too thick. If there is nothing underneath the flooring, this type of wood would be perfect for the project, assuming that you have the budget for it. Solid wood will cost a lot more than other cheaper alternatives. But if you are considering installing floor heating systems beneath the flooring, solid materials may not be your best option. The thickness just occupies most of the space, leaving you very little to work with. In such cases, the other option will appear more attractive.
Now, you need a high speed buffer to restore the shine of your floor. Once waxing and buffing is all over, you just need a good polish and scrubbing and your floor is back to life.
If your sub-floor is reasonably flat, 6mm exterior grade moisture resistant plywood is adequate. This should be fixed at 15-20cm centers with screw nails. If your sub-floor is old and extremely uneven, a thicker grade plywood 9mm or 12mm should be used. However before fixing this, level off any hollows with a latex screed compound. Otherwise the plywood will never be completely flat.
Upon closer examination we find that an epoxy has higher chemical resistance compared to its competitor materials, yet suffers from a shorter lifespan. Its high chemical resistance allows it to withstand intense pressure from chemicals and liquids that may spill or cover its surface. Epoxys shortened lifespan is due to its inferior components, which begin to deteriorate in as short as 6 months and as long as 2 years.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Globalhello claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.